From Vacuum Tubes in Wireless Communication by Elemer E. Bucher. 1918. Makes for an interesting contrast with the radio schematic published just 4 years earlier, as shown here http://clk.works/that-background-image/ Dunno, I like the one that needs alcohol to work.
This is the long delayed followup to the earlier post about power resistors as dummy loads and the nonlinearities found. After some further experimentation an 8 ohm load was built from four Riedon PF2270 series 2 ohm 200W thin film resistors (to give an 8 ohm load) and a surplus heatsink with fans. With 200W […]
As part of some ongoing work earlier this year I needed to test the performance of a high performance 200W/channel class D amp (more on the amp in some future post). To get accurate SNR and THD+N measurements a low pass filter is needed in front of the measurement system as the high frequency switching […]
Clockworks and Audio Builders Workshop (ABW, a working group of the Boston chapter of the Audio Engineering Society) created a simple Metronome project for people interested in building their own audio electronics. It’s intended as an entry level project for anyone interested in learning about building electronics kits. ABW has “build events” where the parts […]
In a previous post a distortion producing alligator clip was unearthed. In this post high resistance test leads are discovered. These are generic banana plug to alligator clips (Vellman TLM3) that were purchased from Jameco: which are obvious generic made in China ones but from a reputable supplier versus the ebay/alibaba mystery stuff. Using them […]
This post is one of three related to the work done to measure resistor excess noise. A summary writeup and three other documents with experimental detail are provided to those interested in performing their own experiments. There is still ongoing work to test more parts, the revision currently posted is Rev 3.0
From the presentation at the Boston AES meeting held 27-Feb-18 at Shillman Hall, Northeastern University, Boston, MA. In addition to being a technical presentation aimed at anyone involved with audio, it also served as an example for students interested in submitting papers to upcoming AES events.
This page provides .WAV files that can be combined with audio tracks to perform your own evaluation of the audibility of noise, both the unavoidable white noise and the excess noise (mostly low frequency) that is present in differing amounts based on the resistor technology.
Performing some tests on a prototype circuit with an Audio Precision AP515 it was noticed that a particular power resistor showed an unexpectedly high amount of distortion, almost 0.5% THD+N.
For some reason a scam artist has locked on to our phone number and keeps leaving this message. The message is just wrong at so many levels it’s funny in a pathetic sort of way. Nothing to do with anything really, just more fluff for the website.