The AA0106 board is a convenient way to prototype custom analog circuits. Its unique stacking design allows stacking as many boards as needed to support the standard SignalBlox slice of 8 channels.
The board provides a 0.1″ (2.54mm) grid of holes with a convenient pattern for prototyping op-amp circuits. It has two 34 pin connectors for mating with AnalogBlox carriers but can be used for general prototyping.
Normally supplied in a kit of two boards (for stacking) along with sockets that can be soldered to the board for use with an AnalogBlox carrier such as the as the CC0001 and CC0002. Blank boards are also available for use as a generic prototyping board.
When used with an AnalogBlox carrier and power supplies all of the standard 6 supply voltages and the 3 optional ones are available on the base board.
Schematic and layout source files (Altium CS) and outputs (gerbers, BOM, .step file, 3D pdf)
